Safety
General Safety Procedures (cont.)
Roadway Safety
●
Obey all state and local laws concerning operation on roadways.
●
Place traffic safety cones around your vehicle in accordance with state and local laws.
●
NEVER unlock or unlatch the machine if there is a possibility of the machine swinging into an area
where it could strike any people, vehicles or other property.
●
Before driving your vehicle, always check lighting, directional signals and stop signals on the
machine. Repair or replace any non-functioning lights before driving vehicle.
●
Always pay attention while driving to be sure no material is dropping from the machine.
Maintenance Safety
●
Before performing any maintenance or repair on the machine, disconnect the 7 pin connector and
the power wires.
●
Never enter the machine body while the unit is turned on or connected to the truck.
●
When servicing this machine, ensure the power is turned off and the key is removed from the
keyswitch.
●
Disconnect the battery leads from inside the machine and disconnect the truck wire connections
before performing any service on this unit.
●
Disconnect the power and battery before servicing anything in the control panel or the power
distribution box.
Never leave material in the truck body or machine over-night
Always have control of the machine at all times when not latched and locked in
place to the truck.
Never unlatch or unlock the machine when not on level ground.
Always ensure machine is latched and locked in place before moving vehicle.
Always do walk around inspection before moving vehicle.
It is
highly
recommended for anyone operating the machine to watch the
online training video
and
take the certification exam
https://mulchmateusa.com/video-training
