16
Turn the rotary switch to
“OFF”
and remove the test leads from
the terminals when not used.
Remove the battery if meter is not going to be used for long
periods.
Battery Replacement
WARNING
REMOVE THE TEST LEADS FROM THE METER BEFORE
REMOVING THE BATTERY CASE TO AVOID ELECTRICAL
SHOCK AND INJURY.
1.
Replace new batteries if the Meter displays “
”.
2.
Loosen the battery compartment door screw and remove the
door from the case bottom.
3.
Remove and replace the battery.
4.
Reattach the battery compartment door to the case bottom and
tighten the screw.
Attention
：
Double check the polarities of the battery.
Test Leads Replacement
WARNING
REPLACE THE TEST LEADS WITH IDENTICAL OR COMPATIBLE
LEADS. LEAD SPEC
：
1000V 10A.
Replace new leads if the current leads are worn.
Contact Dawson
Dawson Tools, Inc.
1142 S. Diamond Bar Blvd., #858
Diamond Bar, CA 91765
Phone: (310) 728-6220
www.DawsonTools,com
Do not recycle
