4096-356
DAWNco satellite products 2.4M Az/El TRUSS MOUNT
13
2.4
SUPPORT STRUCTURE ASSEMBLY
STEP 1:
STEP 2:
Attach one of the angle braces (item 5)
to the top of the hub ring as shown.
Note that the notched end of the angle
goes towards the reflector rib. Secure
the angle to the hub with 3/8" hardware
(items 12, 13, 14, 15).
Hub Ring
Center Hub
[ 13, 14, 15 ]
[ 12, 13 ]
[ 5 ]
A) Rotate the hub if necessary to position
the angle next to the reflector rib at hole
location C as shown.
B) Attach brace with 3 / 8” hardware
(items 12, 13, 14, 15). Do not tighten
until instructed.
C) Attach the remaining 5 angle braces from
the hub ring to the petal ribs in the same
manner.
D) Tighten all hardware completely,
including
the six 1/4" bolts at the base of the
reflector center hub.
Angle Brace
[
12, 13 ]
[ 13, 14, 15 ]
Reflector petal
