Washer does not start
Rattling and clanking noise
Vibrating noise
Thumping sound
POSSIBLE CAUSE
1. Washer may not be plugged
in or connection may be loose.
2. House fuse blown or circuit
breaker tripped.
3. Wash timer is not set.
1. Foreign objects such as coins or
safety pins may be in the tub.
2. Belt buckets and metal fasteners are
hitting the washer tub during the washing
cycle.
1. Washer is not levelled and levelling
legs screws may not be securely
tightened.
2. Clothes not evently distributed in tub.
3. Washer may not be installed on a
solid, firm floor.
1. Heavy wash loads may produce a
thumping sound at the beginning.
HOW TO FIX IT
1. Make sure the plug is tightly
pushed into wall outlet.
2. Electrical line is overloaded. Do
not run other appliances when
washer is in use.
3. Electrical lines may be inadequate.
Contact an electrician.
4. Inappropriate house fuse or circuit
breaker is being used. Use only a
15 amp, time delay fuse or circuit breaker.
5. Set the wash timer.
1. Stop machine and check the tub.
2. Call your authorized service agency.
3. To prevent unnecessary noise and
damage to the tub, fasten fasteners and
turn garments inside out.
1. Relevel washer by ajdusting levelling
legs, screw must be tightened.
2. Stop washer and redistribute clothes.
3. Additional floor bracing may be
needed. Contact carpenter to correct
sagging or slopping floor.
1. This is normal.
2. If sound continues stop machine,
redistribute clothes.
04
POINTS TO REMEMBER
Avoid using excessive amounts of bleach, soap powder of detergent. Use the amount recommended
by the respective manufacturers.
If the machine is installed in areas subject to freeze, ensure that it is completely drained after use.
When washing delicate, clothes e.g., silks, fine nylons, laces etc., it is advisable to place them
in a mesh bag to prevent them from possible damage.
Do not wash lint attracting fabrics with lint producers, e.g., black socks or dark colored
jumpers with white fluffy towels, napkins, etc.
Avoid placing a wet load on the control panel.
Do not move machine in left or right direction because wheels are undirectional.
BEFORE YOU CALL FOR SERVICE
There may be times when your suspend washing machine requires maintenance. Before calling
for service please check the following points. You may be pleasantly surprised that an apparent
malfunction can be easily rectified as follows.
