HOW TO USE
Control Panel
1. Water Inlet
Connect the hose from the water faucet to feed water to the tub.
2. Wash Timer
Used to select the desired time for washing or rinsing.
3. Buzzer
Buzzer will ring automatically before the completion of wash timer cycle.
SPECIFICATION
Model No.
DW 6550 C
Intended use
Type of appliance
Power source
Dimension (units: mm)
Gross weight
Net weight
Rated operating time
Protection against electric shock
Protection against moisture
Standardized water consumption
Water Inlet pressure
Household
Twin Tub
Refer to specification LABEL
810 x 440 x 942
29 Kg
24 Kg
Washing: 15 mins
Spinning: 10 mins
Class 1 appliance
Splash-proof appliance
H
：
76
M
：
64
L
：
52
2 psi - 4.4 psi
Design and specifications could be changed without notice.
Washer does not start
Rattling and clanking noise
Vibrating noise
Thumping sound
POSSIBLE CAUSE
1. Washer may not be plugged
in or connection may be loose.
2. House fuse blown or circuit
breaker tripped.
3. Wash timer is not set.
1. Foreign objects such as coins or
safety pins may be in the tub.
2. Belt buckets and metal fasteners are
hitting the washer tub during the washing
cycle.
1. Washer is not levelled and levelling
legs screws may not be securely
tightened.
2. Clothes not evenly distributed in tub.
3. Washer may not be installed on a
solid, firm floor.
1. Heavy wash loads may produce a
thumping sound at the beginning.
HOW TO FIX IT
1. Make sure the plug is tightly
pushed into wall outlet.
2. Electrical line is overloaded. Do
not run other appliances when
twin tub is in use.
3. Electrical lines may be inadequate.
Contact an electrician.
4. Inappropriate house fuse or circuit
breaker is being used. Use only a
15 Amp., time delay fuse or circuit breaker.
5. Set the twin tub timer.
1. Stop machine and check the tub.
2. Call your authorized service agency.
3. To prevent unnecessary noise and
damage to the tub, fasten fasteners and
turn garments inside out.
1. Relevel twin tub by adjusting levelling
legs, screw must be tightened.
2. Stop washer and redistribute clothes.
3. Additional floor bracing may be
needed. Contact carpenter to correct
sagging or slopping floor.
1. This is normal.
2. If sound continues stop machine,
redistribute clothes.
01
02
