9 / 14 EN
Cooker Hood / User Manual
3.1 Wall drilling and bracket
fixing
85
85
X
Y
min. 750 mm
3.1.1 Wall mounting
•
Draw a vertical line on the supporting wall up to
the ceiling, or as high as practical, at the center
of the area in which the hood will be installed.
•
Draw a horizontal line at 750 mm above the hob.
•
Place bracket on the wall as shown about 1-2
mm from the ceiling or upper limit aligning the
center with the vertical reference line.
•
Mark the wall at the center of the holes in the
bracket.
•
Place bracket on the wall as shown at X mm
below the first bracket ( X = height of the upper
chimney section supplied).
•
Aligning the center of the bracket with the
vertical line.
•
Mark the wall at the center of the holes in the
bracket.
3
Installing your appliance
•
Mark a reference point as indicated at 116 mm
from the vertical reference line and Y mm above
the horizontal reference line.
•
Repeat this step on the other side.
•
Drill Ø 8mm holes at all the center points marked.
•
Insert the wall plugs in the wall.
•
Fix the upper and lower bracket using the
screws (ST 5 X 30) supplied.
•
Insert 2 screws (ST 5 X 30) supplied in the hood
body fixing holes, leaving a gap of 5-6 mm
between the wall and the head of the screw.
Dimensions
Models
X
303 mm
Содержание DCB9630B
Страница 1: ...Cooker Hood DCB9630B...
Страница 12: ...12 14 EN Cooker Hood User Manual 3 Installing your appliance 3 6 Installation of the oil collector...
Страница 16: ......