Quick Guide
- 13 -
1.
Reviewing Defaults
The factory settings of SCSI hostadapter DC-2975 U were chosen to make
changing the jumper settings unnecessary in most cases. Yet prior to installation you
should verify that the actual jumper settings correspond to the recommended
defaults.
Figure: DC-2975 U
Jumper J1 SCSI hostadapter termination (S/E Bus)
no jumper set
ON
position 1-2
OFF
position 2-3
automatic (default)
Automatic termination means that the SCSI hostadapter automatically checks
whether any devices are connected to the internal and/or external devices and enables
or disables the terminators accordingly. We recommend only changing this setting
if problem arise from special configurations.
2.
Installation
You will have to open your computer to install the DC-2975 U SCSI hostadapter.
Please note the relevant manufacturer's guarantee terms. Switch off and unplug the
computer before you ever open the casing! Plug the DC-2975 U SCSI hostadapter into
any free 32-bit "bus master" PCI slot.
