Dawicontrol DC-2964 F, Быстрое руководство

Страница: 17 / 28

Quick Guide - 17 -
7.4 Summary of DC2964.SYS Command Line Switches
If you wish to use the Power Save function or if any problems are caused by
customised configurations, you can add the following switches to the SCSI driver
Start the "REGEDT32" program. Display the SCSI adapter parameters by
opening HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, and Services in
that sequence. Then choose "DC2964" and select Device. A DriverParameter entry
listing the current settings will be displayed on the right panel. Click on DriverParameter
to open a dialog that allows you to change the parameter settings.
The following parameters are supported by Windows NT:
/ID=x x = SCSI ID of the hostadapter. The SCSI-ID of the hostadapter will be set
automatically if this parameter is not specified. Valid SCSI-ID values are
0 to 7. Hostadapters supplied with a SCSI setup ignore this parameter and
use the setup settings instead.
/LUN This parameter enables the device's support of several LUNs (Logical
Units). However, most SCSI devices only have LUN 0 available to them
so that you will need this parameter only for special cases. Hostadapters
supplied with a SCSI setup ignore this parameter and use the setup
settings instead.
/*SN=.. Specifies the Target-IDs for which the synchronous/asynchronous data
transfer settings of Windows' Device Manager are to be ignored, i.e. for
which control is be given to the SCSI device. Hostadapters supplied with
a SCSI setup ignore this parameter and use the setup settings instead.
/PS=.. Specifies the interval (in minutes) after which inactive drives are to be
switched off.