24
Mechanical Checklist
Before each ride
•
Check both wheel axles are secure in the frame & forks
•
Check all quick release levers are fully closed and securely tightened
•
Check tyres are within the recommended pressure limits as indicated on the side wall. It is good practice to carry tyre levers and a puncture
repair kit at all times
•
Check handlebar assembly is tight and rotates freely
•
Check the function of the braking system while stationary
•
Check the gear shifters operate correctly
•
Rotate each wheel ensuring it rotates freely
•
Check the saddle and seat post is secure and adjusted
•
Check the pedals are secure and the chainwheel crank arms are free of lateral movement
•
Check lights, reflectors and bell are all in good working order
Monthly and after long or hard rides, the following additional checks/maintenance should be completed
•
Clean, degrease and lubricate your bike
•
Inspect tyres for wear, damage and punctures
•
Check no spokes are loose, broken or missing
•
Hubs run smoothly with no sideways play
Annual service ad inspection
If you have any doubts about completing and following service and inspection you must seek the services of the professional cycle technician at your
local dealer. You can find your nearest dealer at
www.dawescycles.com
. It is good practice before commencing any service/inspection to thoroughly
clean and degrease your bicycle.
Inspect
•
Frame, forks and suspension parts for damage, cracks, corrosion and deformation
•
Wheels for damage, balancing, spoke tension and rim wear
•
Brake levers, brake blocks/pads, brake control cables and inner wire
•
Chain for corrosion, stiff links and stretch. (Failure to maintain the chain will considerably reduce the performance and life span of the whole
gear system).
•
Chainwheel cranks are securely fastened to the axle at the correct torque
•
Front and rear gears for damage, wear and alignment
•
Disassemble headset, clean, re-grease and reassemble making sure to inspect bearings for wear
•
Remove seat post from frame, clean and re-grease before refitting.
folding bike manual.indd 24
20/06/2011 11:00:20
