Fig 4 Fig 5
The hood must be connected to Φ120 mm diameter pipe. The connection with the pipe is made with
the plastic connecting located within the device.
Long pipes and several curves negatively affect negatively the performance of the hood and should
be avoided. Horizontal sections must have a slight call to the exit.
The use of spiral tubes is not recommended because the performance of the hood is reduced.
Fig 6
The exhaust air should not be dissipated in a conductor which is used for another use
such as fume extracting; Local regulations should be adhered which involve ventilation
and evacuation.
Air recycling operation .
The hood must be fitted with a carbon filter which is not contained in the package, it is sold
separately. Ask for the suitable type in the purchase store or in the resale service centers.
Put the carcon filter in the motor inlet of the hood in case of filter mountable to motor inlet (Fig.7) In
case of carbon flter in sheet form fasten the carbon filter to upper part of grease filter with the
special wires (Fig 8).
*In case of version where air outlet from the front part is supported remove the special cover. (Fig
9)
Fig. 7 Fig. 8
