The mounting bracket is made from hard metallic material. The following steps are for mounting this bracket;
The bracket will be fixed on the wall or surface by 2 x M4 screws (supplied by customer) or double-sided 3M tape
(included in accessory bag in carton box);
DO NOT
install the wireless module inside a complete metallic box or housing. The RF signal can not pass
through metallic wall;
This wireless module would be installed a semi-metallic box, because the RF signal can pass through the non-
metal wall/are;
The best case is to install the wireles module inside or Non-metallic box;
Some non-metallic materials: plastic, glass, wood, leather, concrete, cement…
7.2 Installation location
