Locate the place where the wireless sensor is mounted, from that locate the position to mount the bracket;
Placing the wireless module on bracket and secure it by 02 x M2 screws (supplied in accessory bag)
The mounting bracket is made from hard metallic material. The following steps are for mounting this bracket;
The bracket will be fixed on the wall or material with a flat surface with double-sided 3M tape (included in the
accessory bag in a carton box) or 2 x M4 screws (supplied by the customer);
7.1 Mounting bracket installation
Note:
The bracket can be mounted on the wireless module in both direction, upward or downward
7.2 Installation location
When using 3M double sided tape, please install the sensor at a height of 2 meters or less.
ATTENTION:
DO NOT
install the Wireless sensor or its antenna inside a completed metallic box or housing, because the RF
signal can not pass through the metallic wall. The housing is made from Non-metallic materials like plastic,
glass, wood, leather, concrete, cement…is acceptable.
