DAVIS Wireless Temperature Station, Руководство по установке

Страница: 3 / 12

3
Preparing the Temperature Station
The illustration below shows the Sensor Interface Module, or “SIM”,
inside the shelter.
Insert the 3-volt lithium battery into the battery holder, matching the “+”
sign on the battery with the “+” sign on the SIM.
Sensor Interface Module on Wireless Temperature Station
Note: Note the location of the DIP switches. You will work with them during the next installation step.
The Temperature Probe Cable is installed and mounted with the cable clamp at the factory.
Setting the Transmitter ID
Each wireless transmitting station must be set to one of eight transmitter
IDs. DIP switches #1, 2 and 3 on the SIM allow you to control the ID —
the “channel” the station transmits on. (DIP switch #4 is used for transmis-
sion testing, not for transmitter ID.)
3-Volt
Lithium Battery
DIP Switches
Cable Clamp
Mount
Temperature Probe
Cable
Square Black Grommets
SENSOR SENSOR
INTERFACE INTERFACE
MODULE MODULE
UV UV SUN SUN
RAIN RAIN WIND WIND
TEMP TEMP
HUM HUM
+
-
Cable Clamp
Test LED
Cable Clamp
Screw