Page 2
Stainless Steel Temperature Probe
I
NSTALLING
THE
S
ENSOR
Follow the instructions in this section to install your sensor. Make sure you
read “Choosing a Location for the Sensor” on page 5 as it contains important
information concerning placement of the sensor.
Typical Weather Wizard II-S, Weather Wizard III, or Weather Monitor II
Installation
The illustration below shows a typical installation for the Weather Wizard II-S,
Weather Wizard III, or Weather Monitor II.
T
YPICAL
I
NSTALLATION
Note:
You may also use the Radiation Shield and Sensor Mounting Arm (pictured below) if desired.
