WeatherLink Console
®
|
Quick Setup Guide
Gather the station IDs.
You will need to know on which ID your sensor
suite is transmitting.
The default factory setting is ID1, but you may
have changed this setting. If you have more than
one transmitting station, each will be set to a
different ID and you will need to know which
station is transmitting on which ID.
Set up your system
Have your sensor suite up and running.
If you have a purchased this console along
with a new sensor suite, you should set up
your sensor suite first. Do this by following the
instructions included with your sensor suite. If
possible, if might be easier if you wait to mount
the sensor suite outside once you have
confirmed communication with the console.
If you already have a Vantage Pro2 or Vantage
Vue sensor suite, or a Sensor Transmitter up
and running, you don’t need to unmount it.
1
Содержание WeatherLink
Страница 1: ...QUICK SETUP GUIDE WeatherLink Console...
