Page 14
Driver ID Code Entry Screen
The Driver ID Code Entry Screen enables you to enter the
driver ID code. When using the Trip 500AL to monitor the
driving of multiple drivers, assign each driver a unique 4-
digit ID code. Before driving the vehicle, the driver must
enter his or her ID code. The Trip 500AL stores the driver ID
code with the rest of the trip information, which enables
you to view information for each individual driver. In addi-
tion, data downloaded by the software is segregated by
driver ID code, enabling detailed tracking of multiple driv-
ers.
The DriveRight Vehicle Management Software allows you to
use the driver ID code to track locations instead when a sin-
gle driver is using a vehicle. You may also use the software to
turn on an alarm which will alert the driver when a driver
ID (or location ID) has not been entered.
NOTE:
Driver ID code 0000 (four zeros) is used to view information
for the vehicle (all drivers) and should not be assigned to any
driver, unless only a single driver uses the vehicle.
In addition to marking data as belonging to a particular
driver, the driver ID code may be used when viewing infor-
mation on the display to filter the information being
viewed. To view information for one specific driver, enter
that driver’s ID code in this screen. The Trip 500AL display
will filter out any data not assigned that code. The Driver
Performance Score will be calculated using only data
assigned that code as well.
To view all information, regardless of driver ID code, enter
the reserved code: 0000.
Driver ID Code Entry Screen
CODE
