Page 5
Step 3: Locate and tap power (+12V) and ground
The DriveRight requires a co12 volts and has a negligi-
ble drain on the vehicle battery (8 ma). You can obtain the
+12V from several different places. Generally, you can easily
12V from the fuse box using a fuse tap connector (not
supplied) or using the supplied in-line splice connectors to tap
into a KNOWN circuit that does not involve safety related
equipment (headlights, tail lights, air bag, etc.). Possible candi-
date wires include those from the cigarette lighter, dome light,
glove compartment light, clock, tail gate light, or other conve-
nience functions.
After lo12V, connect it to the red +12V wire (the one
with the fuse holder) using the in-line splice as shown below.
Do not install the fuse into the fuse holder until instructed to
do so in step 4.
If you are g12V from your fuse box, use a fuse tap con-
nector appropriate for your vehicle.
In-Line Splice
Unswitched
+12V
from Vehicle
Trim off flush
stripped wire
Red +12V Wire with Fuseholder
