3
“S
QUEEZE
H
ANDLE
” T
YPE
T
IGHTENING
T
OOL
Slide the installation tool over the stainless steel cable tie as shown and squeeze the
handle to apply tension. If the handle is all the way closed and more tension is
needed, release the handle and slide the tool towards the clasp. Again squeeze the
handle until jthe desired tension has been reached. To cut off the end of the cable
tie, hold tension and twist (either clockwise or counterclockwise).
P/N 07395.058, Rev. C. 10/6/99
3465 Diablo Avenue, Hayward, CA 94545-2778
510-732-9229 • Fax: 510-732-9188
E-mail: [email protected] • www.davisnet.com
