H
EAVY
D
UTY
MOUNTING
KIT
Product #’s: 8140, 8143, 8146, 8150
S
TAINLESS
TEEL
TRAP
M
OUNTING
I
NSTRUC-
TIONS
Страница 1: ...HEAVY DUTY MOUNTING KIT Product s 8140 8143 8146 8150 STAINLESS STEEL STRAP MOUNTING INSTRUC TIONS ...
Страница 2: ...l must be used Two tensioning tools are available The Screwdriver type The Squeeze Handle type If the screwdriver type is used snips or cutters will be needed to trim the stainless steel cable tie INSTALLATION INSTRUCTIONS NOTE Once the end of the cable tie is inserted into the clasp it cannot be removed Do this only when you are ready 1 Measure the neoprene rubber strip Wrap it around the drivesh...
Страница 3: ... position tighten the cable tie by hand 4 Proceed to the tightening instructions for the tightening tool you have SCREWDRIVER TYPE TIGHTENING TOOL 1 Trim the stainless steel cable tie using cutters or tin snips so that 2 remains protruding from the clasp 2 Insert the end of the stainless steel cable tie into the slot at the end of the tightening tool Grip the tool by the handle and hold the magnet...
Страница 4: ...and more tension is needed release the handle and slide the tool towards the clasp Again squeeze the handle until jthe desired tension has been reached To cut off the end of the cable tie hold tension and twist either clockwise or counterclockwise P N 07395 058 Rev C 10 6 99 3465 Diablo Avenue Hayward CA 94545 2778 510 732 9229 Fax 510 732 9188 E mail info davisnet com www davisnet com ...
