DAVIS 7654OV Скачать руководство пользователя страница 16

Vantage Pro2

 Long Range Wireless Repeater Addendum

Document Part Number: 07395.258

Rev D, 7/8/19

For Vantage Pro2  Long Range Wireless Repeater: 7654
Compatible with Vantage Pro2 Antennas: 7656, 7660

Vantage Pro2

, Vantage Vue

®

, Vantage Connect

®

, Weather Envoy

 and Envoy8X

 are trademarks of Davis 

Instruments Corp., Hayward, CA.       
© Davis Instruments Corp. 2019. All rights reserved. 
Davis Instruments Quality Management System is ISO 9001 certified.
Information in this document subject to change without notice.

3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.

510-732-9229 • Fax: 510-732-9188

® 

[email protected]  •  www.davisinstruments.com

Wireless Communication (OV, models)

Transmit/Receive Frequency
& Output Power

. . . . . . . . . . . . . . . . . . . 868.0 - 868.6 MHz FHSS. CE-certified, less than 

8 mW, no license required.Antenna gain can not 
exceed 8 dBi maximum and no more than four 
transmitter IDs to comply with the EN 300 220 
regulation

ID Codes Available

. . . . . . . . . . . . . . . . 8

Range (Line of Sight) . . . . . . . . . . . . . . . up to 1.5 km (5000'), assuming a pair of 8 dBi 

antennas

Contacting Davis Technical Support

For questions about installing or operating your Long-Range Repeater, please contact 
Davis Technical Support. We’ll be glad to help.

(510) 732-7814

Monday - Friday. 7:00 A.M. to 5:30 P.M., Pacific 
Time. We are unable to accept collect calls.

(510) 670-0589

Technical Support Fax.

[email protected]

E-mail to Technical Support.

[email protected]

General e-mail.

www.davisinstrumentscom

Davis Instruments website. See the Weather 
Resources section for copies of manuals, 
product specifications, application notes, and 
information on software updates. Watch for 
FAQs and other updates.

Содержание 7654OV

















Отзывы: