DAVIS 6415 Скачать руководство пользователя страница 10

8

Maintenance

Your Sonic Anemometer itself does not require any regular maintenance other 
than occasional surface cleaning, including the solar panel, with a clean, soft 
cloth and clear water. Make sure that airflow is not impeded by dust, spider 
webs, icicles or other debris. 

CAUTION:

DO NOT use alcohol-based cleaning products. 

Battery Safety Notes

This product has been designed to be powered by a Lithium-ion iron 
phosphate battery (LiFePO4) battery. Any other power supply can be 
hazardous and will void the warranty. 

Handle the battery with care

. There is a risk of fire if the battery is not 

correctly handled. Do not attempt to open or repair the battery. Do not press on 
the battery, do not drill into it, do not place it in a short-circuit situation, do not 
weld the wires directly on the battery, do not put it in fire or water, and do not 
expose it to temperatures over 60°C (140°F). Use only original LiFePO4 
batteries with original connectors.

 

Air transport: 

When the product is transported by air, the battery must be 

disconnected. Refer to IATA recommendations.

Содержание 6415













Отзывы: