A Note on Securing Cables
11
A Note on Securing Cables
To prevent fraying or cutting of cables, secure them so they will not whip about
in the wind. Secure a cable to a metal pole by wrapping electrical tape around
them both. Make sure cables are secure by placing clips or ties approximately
every 3 – 5' (1 – 1.6 m).
Note:
Do not use metal staples or a staple gun to secure cables. Metal staples—
especially when installed with a staple gun—have a tendency to cut the cables.
Contacting Davis Instruments
If you have questions about your Temp/Hum station, or encounter problems
installing or operating the station, please contact Davis Technical Support.
Note:
Please do not return items to the factory for repair without prior authorization.
(510) 732-7814
for Technical Support, Monday – Friday, 7:00 a.m. – 5:30 p.m.
Pacific Time.
(510) 670-0589
Fax to Customer Service or Tech Support.
E-mail to Technical Support.
General e-mail.
www.davisnet.com
Copies of User Manuals are available on the “Support”
page. Watch for FAQs and other updates. Subscribe to the e-newsletter.
Specifications
• Temperature range: –40 to 140° Fahrenheit (–40 to 60° Celsius)
• Wireless transmission frequency: 916.5 MHz
868.35 MHz for overseas version – Product # includes “XA”
• Transmitter ID codes: 8 user-selectable
• License: low power (less than 1 mW), no license required
• Primary power input: CR-123A 3-volt lithium battery
• Secondary (backup) power: Optional Vantage Pro AC power adapter
Cable Clip
Cable Tie
