Davis Instruments Vantage VUE Sensor Suite, Руководство пользователя

Страница: 22 / 24

20
after about a second. The first beep tells you the processor is running. The second
beep verifies the installation of the data logger. (If you do not hear two beeps,
contact Davis Instruments Technical Support.)
The data logger is communicating with the Envoy, but data is still not being
communicated to WeatherLink.com and/or WeatherLink software.
1. See if you have a connection to the Internet established. Verify that you can access
a website from a computer connected to the router or switch that the
WeatherLinkIP data logger is using.
2. Check the cable connection between your WeatherLinkIP data logger and the
broadband router. Check if the green light on the WeatherLink IP data logger is on
or blinking.
3. Leaving the data logger connected to your router, disconnect power from both
your router and your Envoy, both AC and batteries.
4. Return power to the router. Wait for at least one minute as the router reboots and
re-establishes connections.
5. Return AC power to the Envoy. On power up, you will hear two beeps.
6. Check if the green light on the WeatherLink IP data logger is on. If it is not on,
contact Technical Support.
7. For WeatherLink.com: Wait five minutes. Go to www.weatherlink.com and check
that your “My Weather” page is currently being updated.
8. For WeatherLink Software - Open WeatherLink. Open the Communications Port
dialog box. Select TCP/IP if it is not already selected. Select the communications
type under TCP/IP you wish to use.
For Local Connections Only
• In the Communications Port dialog box, select Local Device ID and click Find . If
the data logger is communicating on the network, the Communications Settings
dialog box displays the Device ID and IP address of your data logger. If the dialog
box does not display, check connections and try again or contact Technical Support.
• Click Test to verify communication between the station and the software.
For Web Download Only
• In the Communications Port dialog box, verify that the User ID and Password are
the same User ID and Password you used when you created your web account on
www.weatherlink.com.
In the WeatherLink software, the barometer graph on the Bulletin does not “fill
in” completely.
When you first load the bulletin, the barometer graph will only fill in completely
when you have data in your database for the last six hours. Make sure:
• There is data in your database for the span of the barometer graph.
• The time and date of the stored barometer data is correct in your database.
• The time and date on the PC is correct.
• The time and date on the weather station are correct.