Installing the Rain Collector Heater
Page 5
5. Loosen the screw heads on the terminal block.
You will eventually secure the heater cable wires underneath these screw
heads.
6. Secure the heater assembly to the Rain Collector.
For non-Vantage Pro Rain Collectors, secure the heater assembly to the Rain
Collector base using the #6-32 x 3/4” (19 mm) screws, a lock washer, and a
hex nut, as shown below.
Securing the heater in a Non-Vantage Pro Rain Collector
Note:
Non-Vantage Pro Rain Collectors consist of Rain Collectors used with all Weather Wizard III,
Weather Monitor II, GroWeather, Health Enviromonitor and Energy Enviromonitor Weather
Stations.
Terminal Block
Rain Collector Heater Terminal Block
