Page 14
Solar Radiation Shield Manual
M
OUNTING
THE
S
OLAR
R
ADIATION
S
HIELD
Follow the instructions below to mount the Solar Radiation Shield. There are
separate sections for each of the basic mounting options. You should modify
the instructions as necessary to fit your needs.
Mounting On the Side of a Post or Wall
In order to mount the Solar Radiation Shield onto the side of a post or wall, you
will need the Solar Radiation Shield assembly, three #8 split lock washers, three
#8 flat washers, and three #8 hex nuts. You will also need to supply four
1/4” x 1 1/2” lag screws.
1. Using four 1/4” x 1 1/2” lag screws (not included), attach the mounting bracket to the
mounting surface in the desired location.
A
TTACHING
M
OUNTING
B
RACKET
TO
THE
S
IDE
OF
A
P
OST
2. Slide the screw ends protruding from the top of the Solar Radiation Shield assembly
into the holes on the mounting bracket.
3. Secure the mounting bracket to the Solar Radiation Shield using a #8 flat washer, #8
split lock washer and #8 hex nut on each of the screw ends.
Tighten until the mounting bracket is firmly attached to the Solar Radiation
Shield.
A
TTACHING
S
OLAR
R
ADIATION
S
HIELD
TO
M
OUNTING
B
RACKET