Davis Instruments and Vantage Pro Скачать руководство пользователя страница 3

Страница: 3 / 4

Installing the Sensor Mounting Shelf on the ISS

Page 3

NSTALLING

THE

ENSOR

OUNTING

HELF

THE

ISS

1. Place a support tube on one of

the two mounting holes in the
rain collector base.

2. Place a lock washer and a flat

washer onto one of the 7-3/4"
(19.7 cm) screws. Hold the
shelf so the support tube
screw hole is over the center
of the tube (see figures).

Insert the screw through
the shelf, the tube and the
base.

3. Hold a nut in the opening of

the hexagonal recess on the
underside of the base.

Turn the screw until the
assembly is loosely held
together.

4. Repeat steps 1–3 with the sec-

ond support tube and screw.

5. On the underside of the shelf,

ensure that both tube-ends
are inside the circular
recesses in the shelf.

Tighten both screws.

Shelf

Support Tubes

#10-24 x 7-3/4" Screws

#10 Flat Washers

#10 Lock Washers

#10-24 Nuts

Holes for Support Tube Screws

Three Holes for Sensor Screws

Содержание and Vantage Pro

Страница 1: ...solar radia tion sensor and a UV ultraviolet sensor This manual contains instructions for installing the shelf on the ISS consult a sensor manual to mount it on the shelf COMPONENTS The sensor mounti...

Страница 2: ...This manual shows installation of the sensor mounting shelf before the two round solar sensors have been attached to it If you like the solar sensors can be mounted on the shelf before it is installe...

Страница 3: ...Insert the screw through the shelf the tube and the base 3 Hold a nut in the opening of the hexagonal recess on the underside of the base Turn the screw until the assembly is loosely held together 4 R...

Страница 4: ...ere is an illustration of the shelf after the sensors have been mounted on it Detailed instructions for attaching the sensors are contained in their manuals It makes no difference which sensor is moun...