3
•
IMPORTANT:
Before each toasting process,
ensure the browning control is set to the
correct level and not too high.
•
WARNING:
Before operating, always
ensure there are no foreign objects in the
slots. Do not insert any foreign objects
or poke into the slots to avoid risk of
electric shock and damage of the heating
elements. Never use force when removing
jammed bread slices.
Important safeguards for electrical
appliances
• Ensure the voltage rating of your mains
power supply corresponds to the voltage
requirements of the appliance (220V-240V
50/60Hz AC). Always connect the
appliance directly to a separately
protected mains power supply wall socket
with a protective conductor (earth/
ground). Before operation, completely
unwind the power cord.
• Always switch off (CANCEL button) and
unplug the appliance when not in use,
before moving or cleaning the appliance.
• Do not place the appliance or any part
of it on or near hot surfaces (heater, gas
burner, grill or oven). Do not place the
appliance on the cord. If the power cord
warms up during operation or is likely to
be damaged, it must be replaced by an
authorised service center. Do not attempt
to repair the power cord!
• Do not immerse the appliance or power
cord in water or any other liquid. Do not
spill or drip any liquids on the appliance
or power cord to avoid risk of fire and
electric shock. When liquids are spilled on
the exterior of the appliance, immediately
press the CANCEL button, unplug the
power cord and dry the appliance.
Do not place the appliance or any part of it
in an automatic dishwasher.
TECHNICAL SPECIFICATIONS
Power supply:
220-240V~, 50/60Hz
Power
consumption:
685-815W
FIRST USE
Unpack the appliance carefully and check if
there are any parts that damaged or missing.
CAUTION:
It is important to carefully remove
all packing and shipping materials (in the
slots and under the On/Off handle) as well
as any price tags, but do not remove any
warning or model labels on the appliance.
Ensure that there are no foreign objects
(i.e., packing materials) in the slots before
operating the appliance.
IMPORTANT:
The appliance is operating with
an electronic control. The On/Off handle
only engages in the toasting position if the
appliance is connected to the power supply
and switched on.
When using the appliance for the first time,
you may notice a fine smoke emitting as the
components are heating for the first time.
There is no need for concern. To prevent the
smell and taste of your food being affected,
you should heat the appliance on browning
level 6 before placing any cakes and pastries
into the slots (see: Operating Your Toaster).
If the burnt smell occurs again on a later use,
clean the toaster (see: Care and Cleaning).
If the burnt smell persists stubbornly, even
after thoroughly cleaning the appliance,
return the appliance to an authorised service
center for examination and repair.
OPERATING YOUR TOASTER
WARNING:
Always completely unwind the
power cord before connecting the appliance
to the power supply. Ensure, there are no
foreign objects (i.e., shipping materials) in the
slots. Do not insert any foreign objects such as
knives, spoons, or other cooking utensils in the
slots to avoid risk of fire, electric shock, burns
or damage. Always handle with care, especially
when removing jammed bread slices.
IMPORTANT:
Ensure that the crumb tray
is in place before operating the appliance.
Otherwise, crumbs may become charred on
the bottom of the appliance and stick to the
surface.
1. Prepare the appliance for use: Completely
unwind the power cord, place the appliance
on an appropriate surface (level, dry and
heat- resistant) and connect the power plug
into an appropriate power outlet.
2. Insert a slice of bread in each slot of the
appliance.