5. Mount the three other support legs in
the same way.
6. Place the tray on the four support
legs from above so that the support
legs run into the guide bars. Ensure
the holes in the support legs and the
guide bars are vertically aligned
7. Insert a screw through the hole
from the front, secure the screw by
screwing a wing nut onto it.
8. Follow the same steps for all other
corners.
9. Place the grill on the support frame.
10. Make sure that the grill locks into the
support frame so no sliding occurs.
Windshield
1. Place the side ends of the windshield
on the left or right side of the grill
base, push forward to lock in.
2. From above, push the back wall of the
windshield into the two windshield
brackets on the back wall of the grill
tray.
Operating Instructions
Before First Use
Wash the grill plate and windshield
(refer to Cleaning instructions).
Assemble grill using the How To
Assemble instructions. Set up in a
suitable location. Connect the grill
power cord to a socket. Slide the
thermostat control to MAX setting.
Let the grill heat up at the highest
temperature setting for 10-15 minutes.
Switch grill off by sliding thermostat to
MIN and unplugging power cord from
mains. Allow unit to cool.
To Cook
Slide the thermostat control to a level
that suits what you are cooking (e.g.
when barbecuing delicate foods such
as fish or mushrooms, leave toward the
left). The grill will now automatically
heat up when thermostat control is slid
to correct temperature. As soon as the
selected temperature setting is reached,
the red indicator light will go out. The
heating process will automatically end.
As soon as the selected temperature
setting drops, the red indicator light will
illuminate again. The heating process
will then resume until the grill returns
to selected temperature ensuring the
heat is always maintained. For best
results, let the grill heat up for 10-15
minutes before sliding to your preferred
temperature.
Switch grill off, as previously described.
Let the grill cool off completely. Clean
the grill as described in below before
storing.
Cleaning
Prior to first use we recommend you
wash the grill tray in warm soapy water,
rinse and dry thoroughly. Let the grill
cool off completely and remove plug
from socket. Slide out the fat drip tray
and empty. Remove windshield if on.
Remove grill plate from the base. Wipe
the outside of the base with a damp
cloth. Clean the grill plate, the fat drip
tray and the windshield with warm
water and detergent. To preserve non-
stick coating do not use metal scourers
or harsh chemicals. Do not cut food on
cooking grill and use wood or silicone
utensils. Not dishwasher safe.
Contact
Albi Imports
87 Chifley Drive, Preston, Victoria 3072
E: [email protected]
P: +61 (03) 9474 1300
