Page 8
Before placing your mattress in the
crib, you can make your own mattress
protector by cutting the cardboard
packing insert to 27”x 51”. Place it on
the spring frame under the mattress to
extend the life of the mattress.
Attach casters to the legs of the crib.
You may place casters with stoppers
in any position that is most convenient
to you.
KEEP THIS MANUAL IN A
SAFE PLACE FOR
FUTURE REFERENCE.
Please read the Caution and Warning
Statements insert before using your crib.
WE WILL ASK YOU FOR YOUR SERIAL NUMBER
FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS.
PLEASE REFER TO THE LAST PAGE OF THIS INSTRUCTION
SHEET FOR WARRANTY INFORMATION. KEEP THIS MANUAL
INSIDE THE PLASTIC HOLDER ATTACHED TO THE MATTRESS
SUPPORT FOR FUTURE REFERENCE.
Please refer to the label (sample below) on the inside face
of the headboard. Record the model/ item number and
serial number of your crib, the name of the store where
you made the purchase , the date of purchase and the
wood finish in the box to the lower right.
SAMPLE LABEL
Model Number:
Serial Number:
Store Where
Purchased:
Date of Purchase:
Wood Finish:
XXXX
XXXXXXXX
XX/XXXX
CAUTION: ANY MATTRESS USED IN THIS
CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES WITH A THICKNESS NOT
EXCEEDING 6 INCHES.
