All barrel nuts are threaded and come pre-attached to the
bolts. Please ensure you have the correct number of
barrel nuts needed as indicated in the instruction manual
before assembly.
* The bolt may not be able to screw
through the barrel nuts smoothly. It is
suggested to use a flat screwdriver to
stabilize and adjust the direction of the
barrel nut.
Please follow the rest of the instruction steps in the instruction manual to complete the assembly.
STEP 1.
Insert the barrel nuts all the way into the holes. Do not
insert at an angle to avoid damaging the threaded area.
Please use an
Allen wrench
to screw the bolt with the lock
washer straight into the threaded nut until it is tight.
BARREL NUT - ADDITIONAL INSTRUCTION
Flat Screwdriver
Allen wrench
page 3
Step 1
Step 2
Step 3
