DAVINCI GLIDERS Funky2 Скачать руководство пользователя страница 9

DAVINCI GLIDERS /FUNKY2

8

11.2 Frontal collapse

FUNKY2 does not come out the symmetrical front collapse by itself. It has high internal 

pressure with its well designed profile. However a symmetric collapse my occur in 

strong turbulent condition, but It could be fast recovered, if you apply the brake down 

to 15 to 20cm. Release the brake lines, you may recover to the  normal flight.

10. In flight characteristics

11. Deflations

11.1 Asymmetric collapse

Asymmetric collapse usually happens when the pilot has not foreseen this 

possible reaction of the wing.

Asymmetric collapses should be controlled by weight shifting away from 

the collapse and applying enough brake to control your direction. And you 

should use the brake to re-inflate the glider.

FUNKY2 has the best stable glide performance in a normal position with no any brakes. In strong thermals 

and turbulence, we recommend to gently pull both brakes without acceleration to increase stability. The 

brakes provide feedback about the surrounding air, which is needed for active flying.

To familiarize yourself with the FUNKY2 your first turns should be gradual and progressive. To make efficient 

and coordinated turns with the FUNKY2 first look in the direction you want to go and check that the airspace 

is clear. Your first input for directional change should be weight-shift, followed by the smooth application of 

the brake until the desired bank angle is achieved. To regulate the speed and radius of the turn, coordinate 

your weight shift and use the outer brake.

In the unlikely event that a brake line releases from the brake handle or breaks, the glider is 

manoeuvrable using the C-risers. By pulling gently on the C-risers it is possible to steer the 

glider and land safely.

Alternative Steering:

In the unlikely event, that a brake line releases from the brake handle, or breaks, or the brake-

lines are tangled up, the glider is manoeuvrable using the rear-risers. By pulling gently on the 

rear-risers, it is possible to steer the glider and land safely. Don’t pull the rear-risers too much, 

to avoid a deep stall!

In spite of the FUNKY2 has great stability of the flight, strong turbulence or piloting error may cause a 

portion of the wing suddenly to be a deflation.

Содержание Funky2


















Отзывы: