David White LT8-300 Скачать руководство пользователя

Страница: 14 / 16

-14-

Store and transport the tool only in the

supplied protective case.
keep the tool clean at all times.
Do not immerse the tool into water or

other fluids.
Wipe off debris using a moist and soft cloth.

Do not use any cleaning agents or solvents.
Regularly clean the surfaces at the exit

opening of the laser in particular, and pay

attention to any fluff of fibers.
If the tool should fail despite the care taken

in manufacturing and testing procedures,

repair should be carried out by an authorized

after-sales service center for Dave White’s

SitePro instruments.

In all correspondence and spare parts

orders, please always include the

model number and serial number of the

instruments.
All precision instruments should be cleaned,

lubricated, checked and adjusted ONLy at a

qualified instrument repair station or by the

manufacturer, at least once a year.
In case of repairs, send in the instrument

packed in its protective case.

ENVIRONMENT PROTECTION

Recycle raw materials

& batteries instead of

disposing of waste. The

unit, accessories, packaging

& used batteries should be sorted for

environmentally friendly recycling in

accordance with the latest regulations.

MAINTENANCE AND SERVICE

Содержание LT8-300

















Результаты поиска

Содержание LT8-300

Отзывы:

Похожие инструкции для LT8-300

Бренды по названию

Популярные бренды

David White LT8-300, Руководство пользователя

Результаты поиска

Содержание LT8-300

Отзывы:

Похожие инструкции для LT8-300

Бренды по названию

Популярные бренды