David White DT05LS Скачать руководство пользователя

Страница: 18 / 20

-18-

Store and transport the tool only in the

supplied protective case.
Keep the tool clean at all times.
Do not immerse the tool into water or

other fluids.
Wipe off debris using a moist and soft

cloth. Do not use any cleaning agents or

solvents.
Regularly clean the surfaces at the exit

opening of the laser in particular, and pay

attention to any fluff of fibers.
If the tool should fail despite the care

taken in manufacturing and testing

procedures, repair should be carried out

by an authorized after-sales service center

for Dave White’s SitePro instruments.

In all correspondence and spare parts

orders, please always include the

model number and serial number of the

instruments.
All precision instruments should be

cleaned, lubricated, checked and adjusted

ONLy at a qualified instrument repair

station or by the manufacturer, at least

once a year.
In case of repairs, send in the instrument

packed in its protective case.

ENVIRONMENT PROTECTION

Recycle raw materials

& batteries instead of

disposing of waste. The

unit, accessories, packaging

& used batteries should be sorted for

environmentally friendly recycling in

accordance with the latest regulations.

MAINTENANCE AND SERVICE

Содержание DT05LS





















Результаты поиска

Содержание DT05LS

Отзывы:

Похожие инструкции для DT05LS

Бренды по названию

Популярные бренды

David White DT05LS, Руководство пользователя

Результаты поиска

Содержание DT05LS

Отзывы:

Похожие инструкции для DT05LS

Бренды по названию

Популярные бренды