-5-
GENERAL SAFETy RULES
!
WARNING
Read all instructions. Failure to follow all instructions listed
below may result in hazardous radiation exposure, electric
shock, fire and/or serious injury.
If glass light house breaks when dropped, contact customer service
immediately.
Broken glass can cause laceration hazard and unit to
lose its IP rating.
IEC 60825-1:2007-03
< 1 mW, 635 nm
DO NOT direct the laser beam at persons or animals and do not
stare into the laser beam yourself. This tool produces laser class 2
laser radiation and complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No. 50, dated June
24, 2007. This can lead to persons being blinded.
DO NOT remove or deface any warning or caution labels.
Removing labels increases the risk of exposure to laser radiation.
Use of controls or adjustments or performance of procedures other than those
specified in this manual, may result in hazardous radiation exposure.
ALWAyS make sure that any bystanders in the vicinity of use are made aware
of the dangers of looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into
the laser beam intentionally or unintentionally.
Serious eye injury could result.
ALWAyS position the laser tool securely.
Damage to the laser tool and/or
serious injury to the user could result if the laser tool falls.
ALWAyS use only the accessories that are recommended by the manufacturer
of your laser tool.
Use of accessories that have been designed for use with
other laser tools could result in serious injury or unsatisfactory performance.
DO NOT use this laser tool for any purpose other than those outlined in this
manual.
This could result in serious injury or unsatisfactory performance.
DO NOT leave the laser tool “ON” unattended in any operating mode.
DO NOT disassemble the laser tool.
There are no user serviceable parts inside.
Do not modify the product in any way. Modifying the laser tool may result in
hazardous laser radiation exposure.