4) Place the ID card near the scanner and the card number will appear, the following message is then
displayed
Press
[OK]
and you have successfully saved the Fingerprint and ID Card into the system.
3.2 Testing the Enrollment
To confirm if a user is enrolled in the system, simply place a finger on the fingerprint sensor for
verification. In case of the event the fingerprint quality is poor, try using another finger or other
verification methods (password and proximity card) for enrollment.
3.3 Backup Enrollment
To create back up enrollment for any existing user, you must select either
Finger
,
Password
, or
ID Card
option when prompted.
Input the correct employee ID # to create back up enrollment. Then repeat the steps for different types
of enrollment in 3.1.1.
Note: Where system memory permits, it is always recommended to have at least two fingers enrolled
for each long-term user.
16
