David Clark 41021G-01, Инструкция по установке и эксплуатации

Страница: 15 / 23

19537P-26 (11-14)
11 of 15
3. System Interface Cable
The C98-20MR* Cables are used to interface the M-RIM to a radio port on David Clark Company Inc.
Series 3800, 9500, 9800, or SOLO systems. One end of the cable connects to the M-RIM and the other
end connects to the intercom system.
Parts/Tools Required
q
System Interface Requirements:
Series 9800 and SOLO Interface:
o
C98-20MR1 cable (P/N: 40892G-13, qty. 1 each)
Series 3800 Interface:
o
C98-20MR2 cable (P/N: 40892G-14, qty. 1 each)
Series 9500 Interface:
o
C98-20RD cable (P/N: 40892G-01, qty. 1 each)
q
Wire ties
Procedure
q
Determine the path of the cable between the host system and the M-RIM. The host system
should already be installed and tested. The cable should be routed using under-deck conduits
and be as far as possible from radio antenna coax cables and anywhere water may collect.
q
Route the cable and connect to the M-RIM. See Figures 1&4 for connector location.
q
To connect the cable to the M-RIM, align keyways and push. Then push and turn collar
clockwise until it stops. Pull back gently on the cable to ensure connector is properly locked.
q
Connect the other end of the interface cable to the host system. Refer to the host system
installation/operation manual for further instructions.