Davey SolarMatic B3P-20, Инструкция по установке и эксплуатации

Страница: 15 / 24

15
Step 6 - Installing the Collector Modules
Start at the upper most Manifold.
• roll out one (1) Collector module
• Lubricate the Manifold and the red Silicone o-ring barbs
• Partially insert the red Silicone o-ring barbs into the Manifold
• Using a 150mm wide paint scrapper or spatula, (Not supplied in kit) ensure all 10 red Silicone o-ring barbs are
fully inserted into the Manifold
• Clip the Manifold Clip into the Manifold ensuring that the formed slots are facing outward (note these slots
assist with clip removal if required).