3
Power Connection
IMPORTANT INFORMATION:
Your Davey pump is Double Insulated to
Water Circuit. If equipotential bonding structure is required, then a
Equipotential Bonding Point is provided. (Please refer to your local Electrical
Wiring standards).
Davey QB Series are suitable for connection to a nominal 240 volt 50Hz power supply and are
equipped with a flex lead and 3 pin plug or AMP plug to allow connectability to a Davey Spa
controller. If a power outlet is not available within 3 metres of the pump, a 3 pin power point
in a safe, dry place, may need to be provided by an electrician. Extension cords are unsafe
around pools or spas - and should be avoided. If the supply cord of this product is damaged it
must be replaced by the dealer or manufacturer, with genuine Davey spares.
Davey Water Products recommends that all installations are fitted with
earth leakage or residual current protection devices.
CAUTION: In the interest of safety, we advise that
all brands and types of spa pool pumps must be
installed in accordance with AS3000 wiring rules
or your local wirring standards.
POWER CONNECTIONS AND WIRING MUST BE CARRIED OUT
BY AN AUTHORISED ELECTRICIAN.
Wiring Diagram
Black
(High)
Black (High)
Brown (Low)
Blue (Neutral)
Yellow/Gr
een
Blue
(m)
(m)
(a)
(a)
(a)
Switch
Black
Capacitor
Red
White
Brown
Brown
(Low)
Blue
(Neutral)
Yellow/Green
In accordance with EN60335.2.41 we are obliged
to inform you that this appliance can be used
by children aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
