12
AUTOMATIC TIME CLOCK OPERATION
TIMER SETTING AND FUNCTIONS
SELECTOR
SWITCH
1
2
3
4
5
6
7
8
Clock
Timer 1 - ON
Timer 1 - OFF
Timer 2 - ON
Timer 2 - OFF
Automatic
Manual - ON
OFF
POLARITY
FUSE 3A
OPERATION
EcoMineral
®
A
B
0%
100%
6
8:00
AM
NOTE: When you first turn on the power to the Sanitiser, it will take approximately 1min
for the LCD to appear on the screen.
Function Description
Selector
Switch
Position
Functions and Instructions
Set Clock
1
SET THE CURRENT TIME ON THE DIGITAL CLOCK
Select the
Set Clock
position on the selector switch to enable the time of
day to be input. A number ‘
1
’ will appear at the left of the screen.
(a) The display will flash on and off as long as the selector switch
remains at this position. Use the up and down buttons to reach the
desired times. Hold the buttons down for fast increments.
Set Timer 1 - ON
2
SET THE START TIME FOR THE FIRST RUN TIME SEQUENCE
Select the
Set Timer 1-ON
position on the selector switch. A number ‘
2
’
will appear at the left of the screen.
This time factory pre-set to 6am. Proceed as per (a) in the ‘Set Clock”
instruction to change time.
To disable this timer, move up or down to 11:59PM. Press the UP button
one more time to turn OFF. NOTE: This step will also disable the time for
‘Set Timer 1 - OFF’.
Set Timer 1 - OFF
3
SET THE COMPLETION TIME OF THE FIRST RUN TIME SEQUENCE
Select the
Set Timer 1- OFF
position on the selector switch. A number ‘
3
’
will appear on the left of the screen.
This time is factory pre-set to 8am. Proceed as per (a) in the ‘Set Clock’
instruction to change time.
