7576/E14
230V ac 50Hz
Installation Diagram
IP55
Contents
1 - Screws
2 - Grill
3 - Rubber Seal
4 - Prismatic Glass
5 - Base
6 - Insulating Sleeves
Required for Installation
-
Screwdriver, flat-head
- Small screwdriver, flat-head
- Drill (if holes are required)
A
B
C
Fixing screws*
Fitting scew
Main Supply*
Key
Installation and Assembly Instructions
Guarded Step Light
1
2
4
5
3
6
This fitting comes fully assembled; unscrew the two screws to remove the front grill.
This E14 version of the 7567 requires wiring straight into the main supply.
Follow the instructions overleaf to install. Having installed fitting, insert bulb and replace front grill over glass and
rubber seal with two screws. Do not overtighten.
E14
15W MAX
Cable entry
gland
Fixing holes
A
C
NOTE: Cover internal
wiring with the sleeves
provided.
E14
APPLIANCE
LAMP GUIDANCE
TYPE
WATTAGE*
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
15W MAX
n/a
n/a
n/a
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU BEGIN INSTALLING YOUR LIGHT
B
