davebell RL250S, Руководство пользователя, Страница: 11 / 24

10
(2) Stepping spinning
Press the speed key until it is at 0 r.p.m, the laser module will stop spinning. Press the Key Right-Spinning, the laser
module will move clockwise. Press the Key Left-Spinning, the laser module will move counter-clockwise.
3.3.4 Directional scanning
(1) Press the Speed key until it is at 0 r.p.m, the laser module will stop spinning. Press the Key Directional scanning; the
laser module will scan directionally. If press the key repeatedly, the angle of scanning of laser module will continuously
change as follows: 0
°
-10-
°
45
º
-90-
°
180
°
-0
°
.
(2) Press the Key Left-spinning or the Key Right-spinning to change the direction of scanning.
3.3.5 Slope Adjustment
When the instrument is set upright for horizontal rotation, the slope of the X-axis and Y-axis can be adjusted by
using manual mode. To select manual mode, Press the Key Manual/Automatic, the instrument will first enter
into the mode of manual adjustment..
(1)Slope of X-axis
a. Aim the X1-beam to the direction of the slope required.