Dave Smith Instruments Sequential PROPHET X, Руководство пользователя, Страница: 105 / 172

93 Prophet X User’s Guide Creating a Hard-Sync Lead
5. Enable the
sync
2>1
button. (See “Sync 2>1” on page 24 for an
explanation of phase sync.)
6. Set the
pitch
of Oscillator 1 to C3. This will intensify the sync effect.
7. In the
auxiliary envelope
section, select
envelope
3 and set its desti-
nation to
osc
1
freq
. This routes envelope 3 to modulate osc 1 pitch
according to its ADSR (attack, decay, sustain, release) settings .
8. Set the auxiliary
env amount
to 127 and
attack
to 23,
decay
to 60,
sustain
to 100, and
release
to 65. This will set the amount and “shape”
of the modulation.
9. Play some single notes and in the middle range of the keyboard. Clas-
sic hard-sync lead!
10. To make it a little edgier, set filter
drive
to 100, filter
cutoff
to 0, filter
envelope
decay
to 100, and filter
env amount
to 127.
Adding Effects to the Lead
You can enhance the sync lead by adding some delay and reverb.
To add effects:
1. In the
effects
section, press the
effect
1 button.
2. Turn the
effect type
knob and select
delay stereo
.
3. Set
mix
to 22, then set parameter 1 (
time
) to 135, parameter 2 (
feed
-
back
) to 47, and parameter 3 (
lpf
) to 100.
4. In the
effects
section, press the
effect
2 button.
5. Turn the
effect type
knob and select
super plate
.
6. Set
mix
to 47, then set parameter 1 (
time
) to 100, parameter 2 (
tone
) to
138, and parameter 3 (
predelay
) to 12.
7. Play some notes. Searing hard-sync lead!