Dave Smith Instruments Prophet 12, Руководство по эксплуатации

Страница: 45 / 104

33 Prophet 12 Module Operation Manual Modulation
Using the Assign Mod Buttons
The Prophet 12 provides a shortcut for modulation routing in the form of the
Assign Mod Source and Assign Mod Destination buttons.
To assign modulation:
1. Press and hold a
SSign
m
od
S
ource
.
2. Choose a source by turning its knob or pressing its button, or my using a
controller (pitch wheel, mod wheel, or touch slider).
The Modulation screen is displayed and that source is assigned to the first
available mod slot. Release a
SSign
m
od
S
ource
.
3. Press and hold a
SSign
m
od
d
eStination
.
4. Choose a destination by turning its knob or pressing its button.
That destination is assigned to the mod slot. Release a
SSign
m
od
d
eStination
.
5. Use either the a
mount
knob or soft knob 3 to set the modulation amount.
New modulation paths can easily be assigned by repeating these steps until all of
the available mod slots are used.
Cool Tip:
When assigning modulation destinations, hold the d
eStination
button down while repeatedly pressing the parameter selection button to
quickly scroll through the list of available options. For example, if you
wanted to assign Osc 1 FM as a destination, press and hold a
SSign
m
od
d
eStination
and repeatedly press the o
Sc
1 button until the mod destination
in the OLED displays Osc 1 FM.