background image

pag

. 9

Translations are also provided to the best of our knowledge. We cannot accept responsibility for translation errors. The 

German version of the operating instructions is authoritative.

Descriptions and illustrations may differ from the product supplied. Drawings and diagrams are not to scale.

It is forbidden to pass on these operating instructions to third parties and this will lead to liability for damages.

A warranty with the following scope is provided for this product:

All parts which are unusable or whose suitability for use is severely impaired within 24 months for one shift, 12 months 

for two shifts and 6 months for three shifts from delivery to the buyer due to this delivery - especially faulty design 

and defects in materials and workmanship - will be repaired or a replacement provided at our option free of charge.

The guarantee takes the form of the replacement or repair of the product or individual parts of the same, at our 

discretion. We shall bear any expenses incurred herein (transport, toll, labor or material costs), unless the expenses 

increase because the device was subsequently moved to a location other than the customer’s premises. These extra 

charges are the responsibility of the customer/buyer.

We make no warranty for damages caused solely or in part by the following:

improper or improper use, incorrect installation and/or commissioning, natural wear, incorrect handling and/or 

maintenance, unsuitable coating substances, substitute materials and/or chemical, electrical and/or physical effects, 

unless we are responsible.

This declaration does not affect your statutory rights or contractual rights arising from our general terms and conditions.

Wear parts are all parts that come into direct contact with the material being processed and/or are subject to wear due 

to their function. Such parts are excluded from the warranty and from claims for defects insofar as they are based on 

wear. Replacement of a part does not extend the warranty period of the product.

2.10.1 Warranty

2.10.2 Wear parts, lifetime warranty

PRESSURE REDUCER DAT096

Содержание DAT 096























Отзывы: