manualshive.com logo in svg

Datum TYMSERVE 2000, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Datum TYMSERVE 2000 Скачать руководство пользователя страница 24

TABLE OF CONTENTS

SNMPv2 manager using the Party3/Party4 pair.

MD5(1):

  The Party3/Party4 MD5 secret key is a 32 character ASCII representation of a 16 byte

hex value.  The allowed characters are 0-F and the space character.  Any space characters will be
converted to an ASCII 0 in the string.

Party6 TAddress:

   The Party6 TAddress is the IP address (in dotted decimal format) of the

SNMPv2 manager using the Party5/Party6 pair.

MD5(2):

  The Party5/Party6 MD5 secret key is a 32 character ASCII representation of a 16 byte

hex value.  The allowed characters are 0-F and the space character.  Any space characters will be
converted to an ASCII 0 in the string.

Party8 TAddress:

   The Party8 TAddress is the IP address (in dotted decimal format) of the

SNMPv2 manager using the Party7/Party8 pair.

MD5(3):

  The Party7/Party8 MD5 secret key is a 32 character ASCII representation of a 16 byte

hex value.  The allowed characters are 0-F and the space character.  Any space characters will be
converted to an ASCII 0 in the string.

NTP Authentication:

  Enables or disables the use of NTP Authentication per RFC-1305.

NTP Authentication ONLY:

   Enables or disables the NTP Authentication ONLY mode which

restricts access to the TYMSERVE.

NTP Authentication Key ID:

   The Key ID identifies the NTP Authentication key currently in

use on the TYMSERVE.

NTP Authentication   Key:

    The  Authentication   Key   is   a   MD5   secret   key   used   for   NTP

Authentication.  It is programmed as an 8 character ASCII value.

4.8  TIMING PARAMETER DESCRIPTION (-GPS, -IRIG)

This section describes the TIMING parameters for the -GPS and -IRIG versions.

Timing Source:

  This parameter sets the timing source for the TYMSERVE.  When using time

code, be sure to select the time code format, and connect the time code source to the rear panel
(see Chapter 5).   When  using  the internal  clock, you must  set the  time  manually from  the
FEATURE area.  When using the external 1 PPS source, you must set the time manually, and
connect the external 1 PPS to the rear panel.  To use the GPS source you must have the -GPS
option which consists of a GPS antenna and cable.

Time Code Format: 

Selects one of several time code formats.  Also selects between modulated

and DCLS (DC Level Shift) forms of time code.

Current Year:

  For all timing sources except GPS you must tell the TYMSERVE what year it is

because this information is not present with any timing source except GPS.

TYMSERVE 2000 Manual

Datum Inc, Bancomm Div.

xxiv

Содержание TYMSERVE 2000























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды