Base Plate
End Clamp
Magnetic
Temperature
Sensor
Shoulder
On / O
ff
Switch
Solar Panel
1.
RailtempMate Glossary.
Systems
2.
Create a small void in the ballast between sleepers and
slide the RailtempMate base plate under the rail.
3.
Ensure the RailtempMate base is flush under the rail.
The shoulder should sit on the foot of the rail as shown.
4.
Slide the end clamp over the foot of the rail.
Railtemp
Mate
C R T M O N I T O R
5.
Tighten the bolts on the end clamp repeatedly
and alternately using the M10 Allen key.
24/7 Customer Support:
0161 765 3447
www.datum-group.com/about-datum-group/customer-support