PRC-PS-MS
2-1
CHAPTER 2
INSTALLATION
2.1
Unpacking
The PRC-PS is shipped in a heavy-duty corrugated cardboard carton. Do not
discard the cartons and packing materials in case the equipment needs to be
reshipped.
Inspect the PRC-PS for possible damage during shipment. Check all
accessories against the packing list. The packing list should include the
following items:
•
PRC-PS Power supply and battery charger
•
AC Power cord
•
DC Power cord
•
C991608 power cable
•
CY-2562 Battery box
2.2
Power Configuration
2.2.1
AC Input
Power
The PRC-PS can be configured for 110 VAC or 220 VAC by opening the case
and changing the connections on the power transformer. A label on the case
indicates to what voltage level the transformer is set, however it is prudent to
visually inspect the power transformer to verify what input voltage it is
configured to accept.
Refer to the Power Transformer Connections figure on
.
CAUTION: Always remember to remove the AC power cable before
opening the PRC-PS case. If the charger is energized, the techni-
cian is exposed to dangerous voltages that can cause personal
injury or death from electrical shock.
To access the power transformer:
1. Make sure the PRC-PS is turned off and disconnected from any power
source (see CAUTION above).
