OT2106A Electronic Engine Governor Speed Controller
4
1.6 Relevant Devices
Drives, actuators, sensors are relevant devices, they are used together with the controller. For details, see the
drive, actuators, sensors manual.
二、
Specifications
Power supply voltage: 20 ~ 32 VDC
Power: 12 W
Speed Frequency range: Select the following four speed frequency ranges through DIP switches on the
board
500 ~ 1500 Hz
2000 ~ 6000 Hz
1000 ~ 3000 Hz
4000 ~ 12000 Hz
Speed input signal: 1 ~ 30 Vrms, input AC impedance 1000 Ω / kHz, DC resistance of 300 Ω
External speed trim: 100Ω potentiometer, providing ± 5% of the speed of adjustment
Raising speed time: 5 ~ 35 s
Output position signal: 0 ~ 200 mA, load impedance 30 ~ 45 Ω
Actuator Compensation: time constant adjustment range is 0 ~ 500 ms
Differential rate: 0 ~ 8% 2000Ω potentiometer
Application temperature range: -40 ~ +85
℃
Storage temperature range: -55 ~ +105
℃
Relative Humidity: 38
℃
95% when
Vibration and shock: 4 Gs vibration frequency range 5 ~ 500 Hz; Shock 60 Gs
Weight: about 1.2 kg
三、
Installation
3.1 Dismounting
Before unpacking, please check the label on the box, check whether the product is consistent with the
order and make a record, if there is any question, please contact the supplier immediately.
After opening the package, carefully inspect the controller housing for deformation, scratching, loosing or
any component damaged and so on. If there is any question, please contact the supplier immediately.
3.2 Installation Requirements
