Dateq XTC, Руководство пользователя

Страница: 10 / 11

EN
Dateq XTC Manual Operation
9
Output section
The output section consists of a precise 2 x 30 segments LED bar meter and
volume controllers for the various outputs of the XTC.
METER Indication of the Master or Cue level. An operation level of
approximately 0dB is normal.
MASTER Volume controller for the balanced stereo Master, the
unbalanced stereo Out- and unbalanced mono Sub outputs.
Cue-led This LED will light up when the cue-function is not active.
The master signal is then on the PHONES output.
MON Volume controller for the unbalanced stereo Mon(itor) output.
CUE-knob Volume controller for the headphone(s).
SPLIT Determines the use of the headphone when a cue is
activated. Normally only the CUE could be heard at that
time. When SPLIT is active (LED lights up) CUE can be
heard on the right side of the headphone, the Master signal
can be heard on the left side of the headphone.
PHONES Stereo headphone output.
Crossfader and Transform
The crossfader determines the volume of the
channels X (the channel of left fader) and C (the
channel of the right fader). Is the crossfader
positioned left, only channel X can be heard. Is the
crossfader positioned right, only channel C can be
heard. In the mid position both channels can be heard evenly loud.
Is the crossfader in the left position (channel X can be heard) and the transform button is pushed,
the signal of channel C will be added. Is the crossfader in the left position and the matching
transform-button is pushed in, the signal of channel X will be suppressed. The same method goes
for the crossfader in the right position.
Terminators
With the terminator switches, fast and easy filtering of the low, middle and
high tones from the signal of channel X (left set terminators) and/or channel
C (right set terminators) can be realised. This makes special effects possible
and is much easier than the quick turning of the tone controller during mixing.
When the terminate-function is active for Bass, Mid or Top, the matching LED will light up.