Dateq SPL6, Руководство пользователя

Страница: 17 / 34

UK DATEQ SPL6 manual Network installation 17
Installation
The SPL6 configuration pages are tested for use with the following Internet browsers:
•
Mozilla Firefox version 36
•
Google Chrome version 40
Due to security risks Microsoft Internet Explorer is not supported.
Configuration
In this chapter the configuration and system settings for the SPL6 are explained. These settings
normally are made once on installation. All made settings can be stored in a backup file for later
use or restoring the original settings after changing.
Connecting the computer
The computer is connected to the limiter using an UTP cable. The limiter can also be integrated
into an existing network. Connect the ethernet plug into the network.
Directly connected to the computer, a straight or cross wire cable can be connected.
When using a direct cable connection the computers IP address needs to be manually changed.
Make sure the computer is assigned to the same IP range.
The limiter can now be accessed using: http://spl6/ or by entering the default IP address:
http://192.168.1.101/ . When not using the default IP address, like in a custom network
environment, the IP address can be viewed in the settings view on the front panel display.